iPump-Series Penis Pump Safety

By following these instructions on how to properly use our penis pumps, this will help maximize your penis pumping experience.

The iPump Vacuum Pump Head Unit needs to be directly attached to the Replacement Cylinder for the LeLuv iPump OR our Replacement Head Adapter for the LeLuv iPump Series Electric Vacuum Pumps.

First, the penis should be well lubricated and then inserted into the cylinder before beginning your penis pumping session. Upon squeezing the handle, a vacuum is created within the cylinder - penis enlargement happens as your penis grows inside the cylinder. While too much penis pumping does carry some risks, when done carefully it is safe!

The most frequent problem is impatience and pumping too hard and fast, stressing the penis. Too much vacuum can cause temporary bruising, water blisters, red pinpricks and more. Therefore, proceed slowly, be patient, and increase the vacuum gradually over an extended period of time.

Generally, the increases in penis girth (width) will be larger, and longer lasting. Continued girth increase is achieved by using wider penis pump cylinders. If you're more concerned about getting increase in length, it is suggested that you use a narrow cylinder - your penis will get more of a pull in length in a long narrow cylinder than from using a wide cylinder which increases girth (width). We provide penis pump cylinders in many diameter sizes and in two lengths: 9 inch and 12 inch penis vacuum pumps.

Penis Pump Safety:

When using a male vacuum penis pump, one should never proceed to the point where the suction causes pain nor use for more than 10 to 15 minutes continuously. Stop when the penis is only slightly larger than its normal erect size. One of the key safety features of our LeLuv® iPump Penis Pumps is the included safety release purge valve that allows for a quick release of the vacuum. Any time you want to release the vacuum, you can do so with this included safety valve.

How to Safely Use a Penis Pump:

Do penis pumps really work? Following these easy penis pump instructions will help maximize your penis pumping experience and results.

Lubricate the inner wall of the penis pump cylinder (or the seal if you have installed one) and yourself.
Insert your penis into the penis pump cylinder. The cylinder should remain firmly pressed against the base of your penis to keep air from escaping.
Slowly begin to work the penis vacuum pump. There will be a slight sensation as air is drawn from the cylinder. For beginners, it is important to start this process slowly to avoid discomfort. Remember to press the safety release valve if the vacuum becomes painful.
Continue pumping, releasing air until you've found a level of vacuum suitable for you: the penis should look swollen, but should not hurt.
Now make sure no air escapes (unless needed) and wait 20 minutes. You may need to pump further during this time to keep an appropriate amount of vacuum in the penis pump cylinder.
Once the penis pumping session is complete, you should appear thicker and/or longer and have heightened sensitivity. These results are effective for 24 hours, but you may experience lasting results through long-term regular use. We recommend 3 to 4 sessions per week.

Video References:

<video width="320" height="240" controls>
   <source src="https://cdn.shopify.com/videos/c/o/v/e62fa567591941c6b7020f57ccfbbf4a.mp4" type="video/mp4"></video>

<iframe width="560" height="315" src="https://cdn.shopify.com/videos/c/o/v/3daf335ee2b2412aa2bd07ed50bd4b1c.mp4" frameborder="0" allowfullscreen></iframe>